Complete Guide to Mudjacking

Mudjacking is the process of lifting up your slabs by using a mixture called the slurry. The name mudjacking came from the mud that is used in the slurry. The mud is basically a filling material. If you want to get mudjacking done on your old slabs then you should definitely read this article.

Mudjacking is applicable in a variety of places in your home, the application area of mudjacking includes sidewalks, pool decks, driveways, concrete patios, basement floors, curb and gutters, and the list goes on. This is a relatively cheap process and is free from any tripping hazards, also this does not affect the stability of the structure of your house.

The process is simple and easy to carry out, however, you should never try it yourself, there are many different professional contractors out there that will do the job for you. You can just search for mudjacking near me, and you will easily be able to find a good source.

The process requires drilling holes of 2 inches in the slab, so if your slab is not thicker than 4 inches the process of mudjacking cannot be carried out. After the drilling has been completed the slurry is poured in it till the slab reaches your desired level. For better results polyurethane foam is added to the slurry, however, it is costly and the process becomes expensive. After the slurry is poured the holes are cleaned and then sealed by using cement.

One thing that you should keep in mind is that if your slab is in a really bad condition then the process of mudjacking no longer remains an economical option for you. Also if the slurry is not poured in the right way it can end up taking a lot of time for the slurry to settle.